Arnaud Van Tilburgh
~ Elite 1000 Member ~
My oldest son Jasper recently bought a American Import Volvo P1800 from1971. As I also owned him a present, I had the idea to make him an Titanium Key Chain for his car.
So I used the original logo on the car for the design. Original the background is black.
The size of the shield is 23 mm wide.
And As I don’t have good experience with stippling the background really uniform, for this I used a ball bur to remove the background. Then hammered it as flat as possible and then used an airbrush sandblaster with aluminium oxide.
It isn’t black as the night, but very almost. Anyway, I suppose he will like it.
Arnaud
So I used the original logo on the car for the design. Original the background is black.
The size of the shield is 23 mm wide.
And As I don’t have good experience with stippling the background really uniform, for this I used a ball bur to remove the background. Then hammered it as flat as possible and then used an airbrush sandblaster with aluminium oxide.
It isn’t black as the night, but very almost. Anyway, I suppose he will like it.
Arnaud
Last edited: