Harold Blackorby
Member
- Joined
- Jan 12, 2007
- Messages
- 7
I tried your advice and changed the face from 55 to 45 with 5 degree lift and a 17 1/2 heal and it works great for working on Ron Smith's practice plates, but I break the tip some when I working on the plate . I do 5 strocks on each side of the heal on the 1200. no power, and the about 25 on diamond, and then polish on paper . The tool makes a good smooth cut with a bright cut also. I have to sharpen it about 3 times per plate, before using the 55 this was not necessary . Do I need less of a heal?