en2siastic
Member
Hello friends of the cafe,
Here is one way to make a chisel tip.
I use 1/8 hss drill bit blanks of 2-3/4 long. I put it on a tool holder to shape it with a 40 grit belt without over heat it. Then I glue it on my chisel handle with hot glue and after I make the final shape at the diamond grinder and the diamond flat stone.
I hope this could help.
Best regards.
Francis.
Here is one way to make a chisel tip.
I use 1/8 hss drill bit blanks of 2-3/4 long. I put it on a tool holder to shape it with a 40 grit belt without over heat it. Then I glue it on my chisel handle with hot glue and after I make the final shape at the diamond grinder and the diamond flat stone.
I hope this could help.
Best regards.
Francis.