Bambi 8ltr compressor

Ian groves

Member
Joined
Aug 31, 2016
Messages
28
I recently acquired a graversmith and a 8ltr bambi from a ceseased estate and never run grs before as using palm control and assumed his set up was dialed in as everything he has was off good quality in his set up .the issue I have found is when using the grs non stop for like yesterday was 4hrs I'm getting oil in the Watertrap along with moisture.now on my pal. Control I have always run a small 8ltr non oil compressor with zero issues so didn't think be an issue when getting this 15ltr just to run with the graversmith.
The bambi is only 2yrs old and not sure of amount of use its had but there is an issues here as you know you don't want oil in your airlines
 

Attachments

  • Screenshot_20240109_205422_Messenger.jpg
    Screenshot_20240109_205422_Messenger.jpg
    53 KB · Views: 24

rweigel

Elite Cafe Member
Joined
Dec 22, 2017
Messages
204
Location
France (north of Alsace, close to Germany)
Maybe the tiny buffer tank of the bambi does not allow for the oil vapor to settle down? I use a very old JunAir with two compressor heads and a 25l buffer tank, no oil visibly leaves the tank.

Maybe the compressor is overfilled with oil?

Good luck

Ralf
 

Sponsors

Top