I recently bought an assortment of cotton muslin buffs in various shapes that are mounted to 1/4 inch arbors. I figured they might come in handy for buffing inside cups, bracelets, or whatever.
I found an adapter made by Jacobs that is made to go on a standard 1/2 inch motor shaft (Part #AD2505) that has a 2JT taper for a 2JT Jacobs chuck. So, now I can mount the various special buffs to one end of my buffing motor as needed.
I thought I'd share the idea in case someone else might have a use for this setup. :biggrin:
I found an adapter made by Jacobs that is made to go on a standard 1/2 inch motor shaft (Part #AD2505) that has a 2JT taper for a 2JT Jacobs chuck. So, now I can mount the various special buffs to one end of my buffing motor as needed.
I thought I'd share the idea in case someone else might have a use for this setup. :biggrin: