Powderhorn
Elite Cafe Member
This is a word of warning for the folks that have the Air Filter / Oil-Removal kit, P/N 004-579, in there air system. This is not a GRS problem, it is a Manufacturer problem.
On the bottom of the filter bowls, there is a Valve core installed to allow you to drain water and oil. This is where the problem is, that during manufacture, the valve core has been put in by a 600# gorilla. It puts to much stress on the plastic, and will act as a wedge over time, causes the bowl to split around the valve core.
The fix is easy, get a valve core tool, and unscrew the valve core. Reinstall finger tight, check for leaks with Windex.
On the bottom of the filter bowls, there is a Valve core installed to allow you to drain water and oil. This is where the problem is, that during manufacture, the valve core has been put in by a 600# gorilla. It puts to much stress on the plastic, and will act as a wedge over time, causes the bowl to split around the valve core.
The fix is easy, get a valve core tool, and unscrew the valve core. Reinstall finger tight, check for leaks with Windex.