EvanCharuk
Member
- Joined
- Mar 9, 2016
- Messages
- 12
Hello everyone! Just curious as to everyones preference when it comes to curved VS straight gravers. I am using a nGraver system that came with a 90 degree graver that I use for more applications then I probably should. I ordered a 120 degree graver from GRS and its straight. Whenever I use this straight graver I have issues with keeping a appropriate depth to my cut, either being way too shallow or suddenly sinking too deep.
Im sure with a torch, some pliers and some nerves I could bent the 120 degree graver. Should I just learn to cut with it straight ? I would rather buy gravers that are already curved if possible.Saw some on the GRS site but wasnt sure exactly what they were selling.
Any advice or input is welcomed. I searched this topic and didnt find much. I am using a nGraver handpiece not a air powered system.
Im sure with a torch, some pliers and some nerves I could bent the 120 degree graver. Should I just learn to cut with it straight ? I would rather buy gravers that are already curved if possible.Saw some on the GRS site but wasnt sure exactly what they were selling.
Any advice or input is welcomed. I searched this topic and didnt find much. I am using a nGraver handpiece not a air powered system.