Monk was kind enough to mention these little gravers in his effort to help Jonathan with his depth control.
Just to clarify. All the info. on making these gravers is in the Tips Archive.
Please note that the brass tube needs to be full of metal, soldered or JB Welded in.
If you use a 1/16 inch cobalt jobbers length drill you can put the flute section inside the brass and solder or JB weld.
I you use a 1/16 dental bur fill the tube behind it with a piece if 1/16 inch brass or steel rod, soldered or JB'd to avoid having the tubing collapse from down pressure on the graver.
Just to clarify. All the info. on making these gravers is in the Tips Archive.
Please note that the brass tube needs to be full of metal, soldered or JB Welded in.
If you use a 1/16 inch cobalt jobbers length drill you can put the flute section inside the brass and solder or JB weld.
I you use a 1/16 dental bur fill the tube behind it with a piece if 1/16 inch brass or steel rod, soldered or JB'd to avoid having the tubing collapse from down pressure on the graver.
Last edited: