Steampunk Viperfish

tsterling

Elite Cafe Member
Joined
May 20, 2007
Messages
271
Location
NW Florida, USA
Coin_Claw_Steampunk_Viperfish_51.jpg
This “Steampunk Viperfish†was definitely the most complex engraving I've ever done, and while it was only 1 5/8 inches in diameter, that turns out to be quite a lot of real estate - over two square inches to engrave. Add in the large number of inlays (seven inches of gold wire), and it all adds up to about 30 hours of engraving (although I did have to find some time to make two beading punches for the little round rivets - and it turns out titanium isn't very cooperative with beading punches, so I need to “refresh†these).

This was a special version of Serge Panchenko’s Coin Claw pendant knife, and Serge went all out by making a lovely stainless steel damascus blade, Timascus spacer, Al6V4 titanium frame and spring, and a special Grade 2 titanium backplate created especially for engraving. I added copper and 24 karat gold, and, of course, some engraving…

Serge is an up and coming young knifemaker, and it was a real privilege just to handle his neat little knife. The knife is really more like a small, exquisite jewel. Everything fits beautifully, and Serge’s finishes are topnotch. See more of Serge’s work at http://sergeknives.com, https://www.facebook.com/serge.panchenkoknives, and http://instagram.com/sergeknives

Note the little surprise ugly fish (hidden under the blade when it is closed). The Al6V4 titanium is "stonewashed" for a nice even grey finish, and I used tiny little abrasive stones inside the fish to remove that grey finish. It turned out pretty sweet, I think. While I’ve shied away from Al6V4 titanium in the past, it turned out that small cut lines with a Lindsay Carbalt engraver worked out pretty well. I still wouldn’t like to do deep cuts and sculpting in Al6V4 titanium!

Thanks for looking!
 

Adder

Elite Cafe Member
Joined
Aug 19, 2013
Messages
310
Location
Mo i Rana, Norway
Wow, I like it. Though I`m happy that I never got one of those on my fishing tackle.....
Thanks for sharing.

Jørn-Ove
 

Southern Custom

~ Elite 1000 Member ~
Joined
Mar 8, 2013
Messages
1,026
Location
Baton Rouge
Nice job Tom. I love the chain link tail and the lightbulb antenna or whatever you call that wormy little lure these fish have. Fun piece .
Layne
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,857
Location
washington, pa
an absolute gem you did there. i didn't recognize it as a knife till i read the text. marvelous work!
 

tsterling

Elite Cafe Member
Joined
May 20, 2007
Messages
271
Location
NW Florida, USA
Thaks for the superlatives, guys! Glad you've enjoyed Serge's and my efforts - I know we both enjoyed making and showing them to you! I'm looking forward to more colaborations in the future!

Tom
 
Last edited:
Top