Sticky Threads
I am continuing to edit this post as thoughts and responses are posted. There are two types of beginners in my opinion, informed beginners and...
TOOL LIST FOR BEGINNERS Many Cafe members who are experienced engravers contributed to the tool lists below which can serve as a guide as to...
Cafe Threads
Hi all! I have a question about hand push graver geometries and differences ,ive got a bit confused because i would like to know where is the...
Moderator, please delete this erroneous post.
Hi, If you don't have a scriber or you are not happy with your scriber here is my idea, Everyone has roller or ballpoint pen and you need to...
For those wanting to learn the traditional way or for those with a really tight budget, this will get you in the game very inexpensively. This does...
Someone mentioned having problems with magnetized gravers, so I thought I would write an article about a way to help demagnetize the gravers. Some...
A better Bulino Handle Make your own, Very Light Wight, Excellent Bulino Hand Graver. See my recent Post (New Bulino Tool). Rod was correct...
Most know this but another tip that helps with the visibility of graver points. When cutting shiny metal, gold, silver, steel in the white or...
Hi Guys,I thought you might be interested in this. I had to do micro lettering and I was getting annoyed about the size of gravers I had to use....
i think this is what your looking for ? how to make a bulino point ? here is the one i use
A detailed view by Martin Strolz Aside of the excellent advice available today, e.g. on Sam Alfanos DVD “The Expert`s guide to Graver...
As there was some interest in tools lately, I today have tested a few gravers for hardness. The tools came right off my bench, all these I use for my...
Hello everyone. I’d like to show you my reshaped onglette gravers. I used a side of an onglette for a deep beveling of scrolls. Sometimes depth of...
Hi Randy, I do a lot of inside ring engraving and I also use a flat and square graver to make most of my cuts. I use a lift of 15-20 degrees on...
How to make small cobalt graver blanks and punches. By John Barraclough. Some of you might like to try this. Cut a short length...
I'm a engraver of printing dies (self taught) and use round gravers 90% of the time. I know most of you use 120 square gravers. My question has to...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.