It is a PITA but use a carbide scribe and use it to clean the copper out of the file grovesDave London 05-01-2016, 03:56 AM
Thank guys, went back and tried a few more with the flat and I think that I may be able to get better results in the end with it like you said Dan.
But in the real tight curves, I am still getting...
DakotaDocMartin 04-30-2016, 10:55 PM
Thanks a lot Dave, that's what I wanted to hear. :thumbsup: I was wondering if using the V graver was a cop out but if you say both are viable, I will go that way for now.
For the heel, I'll give...
The V graver will work just fine. Smaller heels turn easier with out damage to the side of the cut. I use a 3000 grit stone for the heels just a slight pass, never tried to measure best guess is 1/4...Dave London 04-30-2016, 10:25 PM
You can never have to many books, I was able to get a copy of the Winters book as well ( thanks again JJ ). In reading back thru the threads I found a working link to a college book store that still...T.G.III 04-30-2016, 10:14 PM